9 Tips for Emergency Repairs

A. The tubing is broken. When the tubing breaks, it can find a rubber or plastic tube that fits the diameter of the tubing. If the socket is not tight enough, tie the wires tightly at both ends to prevent oil leakage. B. The tubing ruptured. When the tubing ruptures, the cracked area can be wiped clean, coated with soap, wrapped with a piece of cloth or tape around the broken tubing, and tied with wire, then coated with soap. C. Oil pipe joint leakage. The cotton yarn can be used to wrap around the lower edge of the horn and tighten the tubing nut and tubing connector. The bubble gum or maltose can also be chewed into a paste, coated on the tubing nut seat and allowed to dry to seal. D, leakage of oil leaks. According to the size of the trachoma, use the electric fuse of the corresponding specification, and gently poke it into the trachoma with a hand hammer to eliminate oil leakage and water leakage. E. Damage to the fuel tank. When the motor vehicle is in use, it is found that the oil leakage from the fuel tank can be wiped clean, with soap or bubble gum applied to the oil spill, temporarily blocked; with epoxy resin adhesive repair, better. F, the sedimentation cup breaks. Use a tape pipe or plastic tube to put the sediment cup into and out of the tubing sleeve so that the oil does not pass through the settling cup. G. The inlet and outlet hoses are broken. When the rupture is not great, use a cloth coated with a layer of soap to wrap the leak. If the crack is large, cut the broken part of the hose, put a bamboo tube or iron tube in the middle, and fasten it with wire. H. The valve spring breaks. The broken spring can be removed and the broken two sections can be installed in reverse and ready for use. If the spring breaks into several sections, the intake and exhaust valve adjustment screws of the cylinder can be removed to keep the valve closed and the cylinder to stop working. I. The fan belt breaks. The broken belt can be tied in series with a wire or the car can be driven off with a stop-and-go method.

Size: 320 grains/50g,Field Management Of Goji Berry

1.Weeding

2.Fertilizer and water management

3.Pruning

4.Harvesting and processing

For the company united management on the bases, organic pesticides and fertilizers, which provide good quality of fruits, and proved by the testing authority, our products are fullly complianced with the quality requirements of international market circulation. We have obtained the United States and the EU organic food certification:

Category	SO2	Pesticide
Organic Goji Berry	<10ppm	No pesticide (with organic certificate)

· USDA organic Certificate No.: A2015–00494/2016-07387 Authority :Kiwa BCS 

· EU organic Certificate No.: A2015-00494/2016-07386 code:CN-BIO-141 Authority :Kiwa BCS

Field Management Of Goji Berry

1.Weeding

It is necessary to weed twice a year, people should weed in spring in April and autumn in September, firstly, people should dig the soil with 20cm deep, then people should weed to plant goji berries in wide area, therefore, people weed by machine in modern production, which can not only achieve the purpose of weeding, but also loose the soil to improve the growth environment. In some cases, generally for the goji berries planted in that very year, people can grow some beets or melons among goji berries, which can only be done in the same year.

2.Fertilizer and water management

Goji berries bear fruits in summer and autumn, during planting, the management of water and fertilizer is very important, which can directly improve the yield and the quality of fruit. During the fertilizer spraying, the fertilizer cannot be sprayed on leaves, during fertilizing, people should cover the fertilizers with soil and water them, people always fertilize in autumn and choose the amount of fertilizer by planting area.

3.Pruning

Regular pruning on goji berry plants can ensure better absorption of nutrients and faster growth, generally speaking, the yield will be higher with time goes by, the plants grow faster year by year, people should choose the brunches grown in second year to prune. At the same time, during pruning, people should shape and prune in a scientific way to ensure the branches can be exposed to the sunshine and have better breathing, also to let the branches grow faster, so as to achieve the goal of high yield, and ensure the stable development of branches, improve fruit quality.

4.Harvesting and processing

1) As for drying of goji berry, goji berries should be poured into lye and soaked for a time, then coupled with aqueous alkali which is mixed with water and dietary alkali with the ratio of 10:1, and the put out goji berries to rinse out wax on the surface and dry them in a short time, usually for 5 days. Also, after soaked in aqueous alkali, goji berries can be protected if they have some fruit wounds, the sugar in the fruit can be avoided to evaporate and the fruit color can be maintained.

2) Reasonable drying: goji berries should be dried on the screen, goji berries can not be exposed to too bright sunshine and can not be touched and stirred to avoid damage.

3) Processing: the root of goji berry is also a good medicine, so people should dig out the roots out at the beginning of spring to separate the root and skin and dry them after shredding.

4) Fruit drying: fruit drying can be divided into three stages, the standard of judging final drying is to hold goji berries in hand and observe the dispersed state.

Above all, through a series of measures, with time goes by, people can obtain a good harvest and have high yield and quality orchard, by the way, there are still some technical promotion space that should be found by staff to maintain high yield and quality in the cultivation.

Size 320 Organic Goji Berry

Size 320 Organic Goji Berry,Organic Dried Wolfberry,Sweet Goji Berry,Organic Nutrition Goji Berry

NINGXIA UNION-SURE CO., LTD. , http://www.unionsuregoji.com