Bun machine operating machine and cleaning maintenance
Bun machine operation method:
1. Install the conveyor belt. The conveyor belt is removed before packing. The conveyor belt is fixed by four bolts. Just align the bolts with the four holes on the machine. Check the tightness of the conveyor belt after installation. Don't be too tight or too loose.
2. Open the back cover of the machine and take out the grounding protection wire. A metal bar is placed on the grounding protection wire and placed on the ground for safety protection.
3. The main power switch of the machine is on the control box on the side of the machine. The green button is on, the red button is off, and the main power switch is turned on.
4 , first open the forming plate switch, then the dough mixer switch and the filling machine switch, the corresponding surface and the filling adjustable controller above the feeding surface and the filling switch are used to control the surface and the filling The size, from small to large height surface and the adjustable controller of the stuffing, let it idling to see if the parts are normal, there is no shaking or abnormal sound, and the adjustable controller for the face and stuffing is closed after the inspection is completed. The smallest .
5. Open the forming disc cover and add some cooking oil on the contact surface between the forming blocks to ensure lubrication to reduce friction.
6. After the above work is done, wipe the machine clean.
Â
Bun machine cleaning and maintenance methods:
1. The machine must be based on the principle of three specializations: special person operation, special person maintenance, and special person cleaning.
2. After the end of the work, in the feeding system, the filling system and the detachable parts of the forming block should be cleaned. Do not use hard objects or hit during the disassembly and cleaning process. Be careful to handle it with care.
3 , the cleaning of the molding block must not be scrubbed with a steel brush or hard object.
4. After the molding block is cleaned, place it in order, add a little cooking oil or edible grease to the forming block, and add some cooking oil to the transmission parts.
5. Add edible oil every three months in the cam groove.
6. Each part of the bearing should be removed and washed once every three months.
7. All parts of the transmission parts should be supplemented with cooking oil.
8. The gears and chains between the motors must be greased once every six months.
Supply Meat Bone Meal,Supply Wheat Gluten Meal,China Corn Gluten Meal
Wudi Deda Agriculture Co., Limited , http://www.challmeal.com