Correct use of combine harvester hydraulic steering gear

In the course of operation of the combine harvester, once the hydraulic steering system fails, not only does the safety of the locomotive fail to be guaranteed, but it also seriously affects the operating efficiency. In order to reduce the occurrence of failure of the full hydraulic steering gear and extend its service life, the following points should be noted by the operator in actual work:
1, do not disassemble the hydraulic steering gear, if you must disassemble, be sure to pay attention to clean, do not scratch with the surface.
2. When disassembling, first remove the steel ball from the manpower to the one-way valve, and then remove the valve sleeve and the valve core so that the ball does not fall between the oil inlet hole and the valve ring groove, and the surface of the valve sleeve is damaged.
3. When assembling, do not allow dirt to enter the valve, and apply clean new oil on the surface of the parts. When assembling the valve sleeve and the valve core, they must be balanced and not collided with each other to avoid damage to the parts.
4. When installing the coupling, pay attention to the correct assembly relationship between the coupling and the rotor, that is, the mark on the external spline of the coupling is aligned with the mark on the spline of the rotor. When there is no mark, the pinning of the upper end of the coupling should be made. The centerline of the groove is aligned with the centerline of the teeth of the positive rotor to prevent misalignment between the coupler and the rotor, so that the oil distribution valve cannot be pumped in accordance with the law of suction and discharge of the rotor pump.
5, in the steering process, when the steering wheel is very laborious, do not force the steering wheel to prevent the oil temperature rise, damage the parts. The causes of laborious problems should be found out in time and excluded.
6. When the engine is off or the oil pump is not working, do not turn the steering wheel too fast, and the steering speed should be slow to avoid damaging the spring plate, the pin, or the linkage, resulting in steering errors.
7. Select the hydraulic oil that meets the regulations, pay attention to the cleanliness of the oil, and prevent the oil from generating high temperatures and parts wear.

Low Pesticides Goji Berries are tested by Eurofins Tech Service Co.,Ltd.

Which is the authority pesticides testing company of worldwide. This Goji Berries contain less than 0.01mg/kg pesticides.

Low Pesticides Goji Berries

Low Pesticides Goji Berries,Low Pesticide Dried Goji Berry,Low Pesticide Organic Goji Berry,Red Low Pesticide Goji Berries

Ningxia GuoGuoLaoDie Food Co., Ltd. , http://www.lovegojiberries.com