How to prevent spider withering

Chlorophytum, stems and leaves such as blue, evergreen, hanging in the room, can be called "air flowers." It grows from the pods of the leafhoppers and produces many rooted plants, which are drooping along the basin and are very elegant. Chlorophytum is also known as the "purifier" of indoor air. It can absorb carbon monoxide, nitrogen peroxide, and other volatile gases, so that the air in the room is purified, which is beneficial to human health. However, Chrysanthemum often leaves withered, affecting the outlook, so we must pay attention to prevention and treatment. The methods of prevention and control should be based on the following reasons: There are more than 200 types of spider plants, common ones are Phnom Penh, silver-branch spiderwood, gold-hearted spider plants, and full-length spider plants. Chlorophytum is native to South Africa, South America and tropical Asia. It is hi, warm, semi-yin, moist and cold-tolerant. If there is insufficient moisture in summer and autumn, or if the winter frost is heavy, the tip often leaves withering. The specific prevention and control methods can be adopted: (1) Regular attention should be paid to watering and water spraying to keep the basin soil and surrounding air moist. Because of its more leaves, suspended in the air, or placed in a ventilated area on the balcony, the water demand is greater. This often requires watering and spraying water around basin soil, foliage and pots. Generally summer and autumn can be poured every morning and evening, water spray 1 or 2 times; winter, spring watering can be 4 to 5 days, less pouring in winter, spring a little more. In this way, we can keep the basin soil moist and the air moist, and at the same time, we must also timely clean the fresh leaves of the spider plant to enhance the ornamental quality. (2) Put the pots in half shade to prevent exposure to strong light. Chlorophytum requires proper light, but avoid direct sunlight, otherwise it will easily cause the leaves to wither. (3) Chlorophytum is suitable for large and small plants, like sandy soil with good drainage and good air permeability. Such as medium-sized flower pots, usually 2 or 3 plants are appropriate. Excessive number of plants, the need for more water, such as pots of small soil moisture supply is insufficient, but also leaves withered. It should also be noted that the dead leaves are often cut off. It can also be combined with the annual spring or autumn basin change, the smaller pots will be replaced with large pots, while removing the excess leaves.

What is Fractional Co2 Laser
Fractional CO2 Laser generate beams of coherent light that are absorbed by the body's tissue as energy. The energy is delivered through a narrow range of wavelengths, and in the target area, the energy 
causes temperature elevation which results in tissue evaporation or ablation. Fractional CO2 Laser effectively treat a broad range of skin conditions by removing all or part of the skin. 
The body's natural healing processes then replace the damaged skin with new and healthy tissue. 

How Does A Fractional CO2 Laser Work?
Fractional CO2 Laser produce light at a 10,600nm wavelength, which is absorbed by water in the tissue. The laser energy heats up the water until it reaches a boiling point causing the evaporation of the affected tissue. Some heat is absorbed by tissue adjacent to the ablated target area, causing tissue coagulation which induces hemostasis (the cessation of bleeding) as well as thermal stimulation of deep skin layers, which induces fibroblast stimulation and neocollagenesis (the formation of new collagen).
The laser beam can also be transmitted through a scanner which is a device used to further control the delivery of energy.  The scanner regulates the configuration of energy delivered onto the skin, which can range from covering the entire treatment area or just a fraction of it (leaving the areas in between untreated); (also referred to as fractional ablation). The overall effect of ablation and coagulation, either full or fractional, is the removal of skin and the stimulation of the body to replace it with newer, younger skin.


Fractional CO2 Laser

Fractional Co2 Laser,Fractional Co2 Laser Equipment,Fractional Co2 Laser Treatment,Rf Fractional Co2 Laser

Dermax Technology Limited , http://www.dermaxmed.com