Most of the filling machines are widely used in the food, medicine, and daily chemical industries. Due to the variety of products produced, if there is a failure in production, it will bring about an inferior impact on production. Therefore, companies should learn more about what can happen in machinery and how to deal with it. The filling machine can be guaranteed to be more efficient, high quality and low cost. Below Jiangyin Shuangte Machinery Equipment Co., Ltd. for your analysis of the problem of the filling volume of the filling machine is not allowed or not discharged:
First, the filling volume of the filling machine is not allowed or not discharged
1. The speed throttle valve and the filling interval throttle valve are closed, and the throttle valve cannot be closed;
2. Is there any foreign matter in the quick-installing three-way control valve? If so, please arrange it. There is air in the leather tube of the three-way control valve and the filling head. If there is air, try to cut or sweep the air.
3. Check if all seals are damaged. If there is damage, please replace them with new ones;
4. Whether the filling valve plug has a stuck appearance or delayed opening. If there is a jam, the valve core should be installed from the head. If the delay is opened, the thin cylinder throttle valve needs to be conditioned;
5. The elastic force of the spiral spring is tightened up and down in the three-way control valve, and the elastic check valve will not open;
6. Is the filling speed too fast, adjust the filling speed throttle valve, and lower the filling speed;
7, all the clamps, leather tube buckle can be sealed, if any, please correct;
8. The magnetic switch is not loose. Please lock it after each adjustment.
Laboratory equipment,High Quality Laboratory equipment,Laboratory equipment Details, STANDARD STEEL
WuYi AnBo Medical Equipment Manufacturing Co.,Ltd , http://www.anbomedical.com