"Seven points, three points cut", this is an important flowering experience. Through pruning, the branches of flowers and trees can be distributed evenly, and nutrients can be saved, consumption can be reduced, the tree vigor can be adjusted, and the leggy can be controlled, so that the flowers and trees can be neatly shaped and graceful, achieving the purposes of multiple flowering and multiple fruits. Flowers and trees can be trimmed throughout the year, but mainly in winter and summer. Summer pruning is mainly in the growth period, and the time range starts from the spring sprouting shoot and stops until the end of the autumn. During this period, only partial, mild pruning can be done, and withered or broken branches can be trimmed to maintain the neat and graceful shape of the plant. Winter pruning refers to the pruning of the dormant period. The time range starts from the growth of the late autumn shoots and ends before the buds sprout in the early spring. The pruning is heavy during this period, and the focus of the pruning is on thinning and short cutting according to the growth characteristics of different kinds of flowers and trees. When pruning, it depends on the species and treats it differently. All flowering plants in the spring, such as plum, peach, forsythia, spring, clove, jellyfish, redbud, etc., flower buds are formed on the branches of the previous year. Therefore, winter can not be re-cut, can only cut off the autumn shoots without flower buds. If the pruning is too heavy during the winter, the buds that have formed in the summer will be cut off, affecting the flowering in the second year. The correct course of action is to carry out short cuts within one to two weeks after flowering to promote the sprouting of collaterals into new shoots to form flowering branches in the coming year. All the flowers that bloom on the branches of that year. Such as Chinese rose, hibiscus, jasmine, poinsettia, tuberose, crape myrtle, kumquat, bergamot, hibiscus, should be re-cut in the winter to promote its more than the second year of new shoots, more flowering, and more results. For the foliage plants, the time of pruning should be determined according to the room temperature in winter. If the room temperature is low, it should be trimmed before entering the room so as to reduce the crown width and reduce the floor area; if the room temperature is higher, it should be trimmed in the coming year. In order to avoid stimulating sprouting buds in the winter to sprout new shoots and consume nutrients. For flowers with weak germination power, such as conifers, it is difficult to recover after heavy shearing, and generally do not cut them. Vine flowers and trees do not generally need to be trimmed, and only the old and dense branches can be cut off. Magnolia, cherry blossoms, chicken claws and other tree-like flowers and trees do not make large trim. Pruning is mainly for thinning and short cutting. The thinning is the cutting of dense branches, cross branches, leggy branches, delicate branches, diseased branches and dead branches, in order to facilitate ventilation and light transmission, reducing the occurrence of pests and diseases. The short cut is to shorten the part of the shoot, promote its sprouting lateral branches, adjust the growth, make the canopy evenly distributed, beautiful tree shape, is conducive to more flowering and more results. When trimming, the cut should be smooth and the cut should be about 1 cm above the lateral bud. If the clippings are too close to the lateral buds, the stem and leaf original body in the buds will often be damaged, and the buds will also be easy to air dry; if the clips are too far from the lateral buds, the residual piles will be left, which will affect the appearance. When pruning, it should also be noted that the top lateral buds should remain on the outside of the shoots, allowing the new shoots to grow outwards, which can make the tree beautiful.
High backrest reclining
wheelchair series
Scope of application:
High paraplegia and the elderly frail
Features: 1. The backrest of the reclining
wheelchair is up to the head of the occupant, the detachable armrest and the
pedal can be raised and lowered for 90 degree rotation. The bracket can be
adjusted to the horizontal position.
â’‰ backrest can be segmented to adjust the angle or can be adjusted to
any level (equivalent to a bed) the user can rest in a wheelchair. Headrest can
also be removed.
Rehabilitation Products is our main
products. We have get the CE, ISO, FDA. As a experienced company, ORIENTMED has
a strong ability to help our clients to get the registration and short the
delivery.
Any questions, welcome to contact us. Thank
you!
For Health, we could do better!
Reclining Wheelchair
Reclining Wheelchair,Lightweight Reclining Wheelchair,Transport Reclining Wheelchair,Motorized Reclining Wheelchair
Hebei Orient Imp. & Exp. Co. Ltd. , http://www.orientmedcare.com