1. External inspection Check whether the heat-insulating curtain or shutter is lowered or opened; check whether the cooling water is enough; check whether the surface of the radiator is clogged with debris or thick oil stain layer. 2. Check whether the thermostat works with the engine equipped with the thermostat. When the cold vehicle starts, the water inlet pipe of the water tank in the tank should be basically free of water. If there is a large flow of water out of the water tank at the water tank of the tank, the thermostatic valve will be closed loosely or damaged; if the water temperature greatly exceeds 70°C, the water inlet pipe of the upper water room will flow out without water or large water flows out, indicating the thermostat. Damage or weakened effect. 3. Check whether the water tank heat pipe is blocked. Increase the throttle to the maximum first. Because the pump speed is increased, the pumping capacity is increased. The water in the upper chamber of the tank is forcibly sucked into the lower chamber, and then enters the water pump, thus the water level of the water tank can be reduced. Then the throttle is quickly reduced. If the water tank heat pipe is clogged and water has been circulated to the upper chamber of the tank, it cannot flow smoothly to the lower chamber, so that the water level increases and overflows from the tank opening. In addition, when the heat pipe is clogged, after the engine stalls, a buzzing noise will be heard in the water tank. 4. Check whether the pump impeller works can be judged by two methods: (1) When the impeller is not turning, the engine water temperature rises quickly, and it can rise to 90°C in ten minutes. The water tank then appears to open the pot phenomenon. At this time, the tank water The room is hot, and when the lower drain switch is turned on, the drained water is not hot. (2) Engines without a thermostat can be used to release part of the cooling water by the water release switch to expose the water tank core at the upper water chamber, start the engine and gradually increase the rotation speed. If the water inlet pipe of the upper water room flows continuously, the higher the water speed, The larger the pump, the better the pump works. If water does not flow out, the pin of the pump impeller is broken. 5. Check if the fuel system is working properly. For example, if the fuel supply time is correct, if the bottom surface of the injector housing has been grinded out of pits.
The Soybean, or soya bean, is a species of legume native to East Asia, widely grown for its edible bean which has numerous uses.
Fat-free soybean meal is a significant and cheap source of protein for
animal feeds and many packaged meals. For example, soybean products,
such as textured vegetable protein, are ingredients in many meat and
dairy substitutes. The beans contain significant amounts of phytic acid,
dietary minerals and B vitamins. Soy vegetable oil, used in food and
industrial applications, is another product of processing the soybean
crop. Traditional non-fermented food uses of soybeans include soy milk
from which tofu and tofu skin are made. Fermented soy foods include soy
sauce, fermented bean paste, natto and tempeh.
Soybean
High Protein Yellow Soybean,Natural Yellow Soybean,Organic Yellow Soybean,Frozen Green Soybean
Ningxia Toyo Trade Co.,Ltd , http://www.toyogoji.com