HH series digital display constant temperature water bath manual
First, features and uses:
The water bath is mainly used in the laboratories and laboratories of major universities, research institutes and enterprises, for the distillation, drying, concentration and warming of various chemical samples and biological products.
The water bath pot has the advantages of a general constant temperature water bath pot: the inner tank is welded by a high quality stainless steel plate, and the cover plate has a large aperture of 12 cm, and each hole has four covers and one cover. The outer casing is sneezeed by cold plate, which improves the corrosion resistance of the whole machine.
Second, the main technical parameters:
It is divided into single-column and double-row, and the temperature range is from room temperature to 100 °C.
Model hole number tank volume heating power
HH-S11 hole 160×160×120mm300W
HH-S22 hole 305×160×120mm800W
HH-S44 hole (double row) 305×305×120mm1000W
HH-S66 hole (double row) 465×310×120mm1500W
HH-S88 hole (double row) 640×310×120mm1800W
HH-44 hole (single row) 610×160×120mm1200W
HH-66 hole (single row) 910×160×120mm1500W
Third, the use of:
When using, you must first add water to the pot. The water level must be higher than the surface of the electric heating tube. Turn on the power. When setting the temperature, press the SET button to set or view the temperature setting value. Press the SET button, the temperature display character starts to flash, indicating that the meter enters the setting state; at this time, press the Ҡsetting value to decrease, press the Ҡsetting value to increase, often press the ҠҠkey to increase the number quickly. Reduce the change. When the set value is reached, press the SET button again, the meter will return to the normal working state, the temperature setting is completed, the heating work starts, and the indicator light in the upper left corner of the temperature display lights up. The temperature displays the current temperature value. When the set temperature is reached, it enters the constant temperature state, and the indicator light in the upper left corner of the constant temperature display goes out.
Fourth, note:
1. This product uses 220V AC power. The power input cable is a triangular socket, and the grounding wire should be properly grounded.
2, the water should not be added too much in the pot, so as not to overflow the pot when boiling, but the low water level of Zui can not make the heating tube out of the water.
3, the pot memory a 6 mm stainless steel rod to do the temperature sensor, do not collide, so as to avoid temperature out of control.
[ print ] [ back to top ] [ close ]Monascus Red For Frozen Meat is specially used in frozen meat products for enhancing the color of food in meat industry. During the use, Natural Red Pigment don't influence the properties of the meat. Food Additive Monascus Red is easy to handle and can be applied to many kinds of meat products, such as ham, sausage, etc. If you want to know more about Food Red Colorant Powder, please click the products details to view parameters, pictures and other information.
Monascus Red For Frozen Meat
Monascus Red For Frozen Meat,Natural Red Pigment,Food Additive Monascus Red,Food Red Colorant Powder
Guangdong Kelong Biotechnology Co., Ltd. , https://www.kelongfood.com