The harvester received autumn harvest from the summer. During the year, the harvester has short working hours and long parking time. If he does not pay attention to management, he can directly shorten the service life. Therefore, the harvester must be "six defenses." 1. Anti-daylight night dew Due to the different types and models of harvesters, some of them are large in size and require specialized storage. Some pilots are afraid of trouble, and they take care of themselves. They only use simple shelters to shield them. The wind and rain damage the body to varying degrees. As the saying goes, if you can afford a machine, you can afford to keep it. Only by keeping it well can you use it well. Therefore, regardless of the type of harvester, you should try to cover the dedicated library. 2. After every quarter of harvesting, the debris, swarf, gully, and grains of the harvester should be completely removed, and the inside and outside of the machine should be washed with pressurized water, dried, and then stored in the computer room. Inside. At the same time, the lubrication points are cleaned, lubricated or sealed with oil. During storage, paint the rust-proof paint on the part of the protective paint. 3. Anti-varying type decay Various kinds of transmission belts are improperly stored and are easily rotted or deformed. These products should be removed after use, wiped clean and dry, there is a place for indoor ventilation, and prevent insect or rat bites. For all the drive chains, wash them with diesel oil or kerosene, dry them, put them in oil for 15-20 minutes, or soak overnight in the machine music. After the oil is no longer dripping, apply grease, and wrap it in kraft paper. , Put it in a dry and ventilated place. 4. Anti-rubber parts The rubber and plastic products on the aging harvester are susceptible to aging and deterioration due to the effects of sunlight and ultraviolet rays, and the elasticity is easily broken. Therefore, for the storage of rubber parts, it is best to use hot paraffin oil on the surface of the rubber gills, and put it indoors in a place that is ventilated, dry, and free from direct sunlight. 5. Plastic deformation springs, belts, shanks, tires, etc., will be plastically deformed due to prolonged stress or improper placement. For this reason, some places need support. If the tire is supported by a pressure load, the pressure spring will be loosened, the transmission belt will be removed and stored alone, and the long cutter bar will be removed and placed flat or hung vertically. 6. Loss of small parts against random use of all work, quantity, fixtures, especially special tools and various spare parts, it is best to register in person, safekeeping by special personnel, return to the place of restoration after use, and avoid using it afterwards, and then use it to hurry. . In addition, the livestock battery should be removed and stored separately using the intermittent charge injection method or dry storage method.
Pharmaceutical Glass Vials, Pharma Glass Vials, Pharma Vials , butyl rubber stopper, seal, cap, empty IV bags, Empty IV Container, glass vials, ampoules
Pharmaceutical Packaging
Pharmaceutical Glass Vials,Pharma Glass Vials,Pharma Vials,Empty IV Container
China Lemon Trading Co.,Ltd , http://www.lemonvial.com