1. The supporting power for the 150-type straw returning machine is large and medium-sized tractors, while the small straw returning machine is powered by small four-wheel tractors. Due to the different structural dimensions of the tractor itself, there are differences in the suspension system. When supporting large-scale equipment, attention should be paid to the power transmission universal joint square shaft length, when the supporting power is the Shanghai-50 tractor, the square shaft length is 250 mm; when the supporting power is the Tieiu-55 tractor, the square shaft length is 320 Millimeters; other universal. 2. After installing and debugging the straw returning machine and the matching host, the unit should be adjusted: 1 Horizontal horizontal adjustment: Place the unit on the horizontal plane to observe, and adjust the length of the left and right suspenders to make the horizontal horizontal of the implement; Adjust and adjust the length of the central pull rod to make the machine tool vertical. 3 Adjust the gap between the cutter tooth and the ground. Adjust the ground wheel in the field so that the distance between the tooth end and the ground is 1 cm to 2 cm. 3. Operation requirements The operation requirements of the straw returning machinery are: 1 First, start the operation and then return the straw returning machine to the working position before the field operation, gradually increase the throttle after the power is engaged, and start the operation after normal operation; If the turn is slow, the unit should reduce the speed and make a slow turn. If there are many surface crucibles, the machine tool should be slowly raised, and the work should be resumed after the turn. 3 During transportation, attention must be paid to land transfer and no-load transportation. Cut the power of the unit and then lift the unit. If it is semi-mounted, it is also necessary to pay attention to adjusting the ground wheel so that the unit is in a transport state. 4. Safety Tips It is forbidden to troubleshoot the operation, overhaul the equipment, lift the rotation, and stand behind the machine. If there is abnormality in the unit, it should be stopped and checked before it can be rectified. 5. Grasp the quality 1 straw moisture crop into the yellow ripening period, you can pick the ear. The straw and leaves of the crop during the yellow ripening period are yellow-green, the water content is generally above 30%, and the straw is brittle and not completely fibrous. At this point, the straw has a good comminution effect. After returning to the field, the straw itself and the soil moisture in the field can also be used to accelerate the decay of the straw. If the returning field is not timely, dry straw and dry ground will increase the length of the smash, and the effect will be worse. After ploughing, the straw will absorb moisture in the soil and partially dry and heat, which will affect the seed germination and root growth of the sowed crop. therefore. The dry straw cannot be directly reseeded after returning to the field. If conditions permit, it can be reseeded after watering. 2 Retention height The gap between the cutter teeth and the ground directly affects the stubble height and returning quality. The gap of 1 cm to 2 cm is the value of the unit in actual operation. The main factors affecting are the dry, wet, hard and loose soils in the plots. Actual operations generally use the observation method to determine the clearance, the unit side to adjust the hydraulic control limit nut (separate suspension system should adjust the position of the limit plate on the hydraulic cylinder), so that the straw cutter blade more fully to the straw It is advisable to crush without putting in soil. This work requires repeated adjustments in the field with vertical leveling. 3 Belt Tension In the operation of returning straw to straw, there is often a problem of sparse field returning to the field, a decrease in rotation speed of the intensive field block, and poor quality of returning land. This is mainly due to increased unit load, belt slipping, and wheel heating. Caused. Therefore, the tension of the V-belt should be checked frequently. 4 After the disposal of the straw, the rot shall be used for smashing and smashing the root system immediately after returning the crop; timely ploughing will cover the straw tightly. And maintain moisture, promote early rot rot into fertilizer.
Size: 320 grains/50g,Field Management Of Goji Berry
1.Weeding
2.Fertilizer and water management
3.Pruning
4.Harvesting and processing
For the company united management on the bases, organic pesticides and fertilizers, which provide good quality of fruits, and proved by the testing authority, our products are fullly complianced with the quality requirements of international market circulation. We have obtained the United States and the EU organic food certification:
· USDA organic Certificate No.: A2015–00494/2016-07387 Authority :Kiwa BCS
· EU organic Certificate No.: A2015-00494/2016-07386 code:CN-BIO-141 Authority :Kiwa BCS
Field Management Of Goji Berry
1.Weeding
It is necessary to weed twice a year, people should weed in spring in April and autumn in September, firstly, people should dig the soil with 20cm deep, then people should weed to plant goji berries in wide area, therefore, people weed by machine in modern production, which can not only achieve the purpose of weeding, but also loose the soil to improve the growth environment. In some cases, generally for the goji berries planted in that very year, people can grow some beets or melons among goji berries, which can only be done in the same year.
2.Fertilizer and water management
Goji berries bear fruits in summer and autumn, during planting, the management of water and fertilizer is very important, which can directly improve the yield and the quality of fruit. During the fertilizer spraying, the fertilizer cannot be sprayed on leaves, during fertilizing, people should cover the fertilizers with soil and water them, people always fertilize in autumn and choose the amount of fertilizer by planting area.
3.Pruning
Regular pruning on goji berry plants can ensure better absorption of nutrients and faster growth, generally speaking, the yield will be higher with time goes by, the plants grow faster year by year, people should choose the brunches grown in second year to prune. At the same time, during pruning, people should shape and prune in a scientific way to ensure the branches can be exposed to the sunshine and have better breathing, also to let the branches grow faster, so as to achieve the goal of high yield, and ensure the stable development of branches, improve fruit quality.
4.Harvesting and processing
1) As for drying of goji berry, goji berries should be poured into lye and soaked for a time, then coupled with aqueous alkali which is mixed with water and dietary alkali with the ratio of 10:1, and the put out goji berries to rinse out wax on the surface and dry them in a short time, usually for 5 days. Also, after soaked in aqueous alkali, goji berries can be protected if they have some fruit wounds, the sugar in the fruit can be avoided to evaporate and the fruit color can be maintained.
2) Reasonable drying: goji berries should be dried on the screen, goji berries can not be exposed to too bright sunshine and can not be touched and stirred to avoid damage.
3) Processing: the root of goji berry is also a good medicine, so people should dig out the roots out at the beginning of spring to separate the root and skin and dry them after shredding.
4) Fruit drying: fruit drying can be divided into three stages, the standard of judging final drying is to hold goji berries in hand and observe the dispersed state.
Above all, through a series of measures, with time goes by, people can obtain a good harvest and have high yield and quality orchard, by the way, there are still some technical promotion space that should be found by staff to maintain high yield and quality in the cultivation.
Size 320 Organic Goji Berry
Size 320 Organic Goji Berry,Organic Dried Wolfberry,Sweet Goji Berry,Organic Nutrition Goji Berry
NINGXIA UNION-SURE CO., LTD. , http://www.unionsuregoji.com