Test method for grinding fish tissue by QM100 high-throughput tissue grinder
1 ) Time: 2015/5/12
2 ) Sample: 1 fresh squid
3 ) Instrument: Host, QM100 high-throughput tissue grinder, Wuzhou Dingchuang (Beijing) Technology Co., Ltd. 50ml stainless steel grinding tank 1 pair; QM100 high-throughput tissue grinder grinding fish tissue test method
4 ) Steps:
a. Take 2 pieces of fish on the back of the squid, about 5 grams per piece (excluding fish scales);
b. Cut two pieces of fish with scissors and put them into two grinding jars. At the same time, put two 15mm diameter grinding balls in each tank, then screw the grinding tanks separately and fix the tank in the rocker arm of the grinder. .
c. Set the grinding frequency of the QM100 high-throughput tissue grinder to 1800 rpm, set the grinding time to 3-4 minutes, and then start the grinder.
d. After the grinding is completely stopped, take out the grinding jar, unscrew the can lid, and take out the ground fish sample. Test method for grinding fish tissue by QM100 high-throughput tissue grinder
Demonstration of the operation steps and grinding effect of the QM100 high-throughput tissue grinder for grinding fish tissue test method:
| figure 1. Take the fish from the back and cut it into two small pieces. |
| figure 2. The shredded fish are placed in a grinding tank, and two 15mm grinding steel balls are placed in each grinding tank. |
| image 3. Grinding at 1800 rpm for 3 minutes |
| Figure 4. The result of the grinding is very fine fish paste |
5. Results:
The ground fish is slurried and evenly detailed without any block of fish tissue. The test method for grinding fish tissue with QM100 high-flux tissue grinder is good. Test method for grinding fish tissue by QM100 high-throughput tissue grinder
Foam Dressing,Soft Elastic Waterproof Foam Dressing,Breathable Foam Dressing,High Absorbency Trauma Foam Dressing
Zhende Medical Co.,Ltd , https://www.zdmedicalproducts.com