Micro tillage machine safety operation procedures

1. Operators of tillage machines must be professionally trained or familiar with the instructions of the machine before operation. Persons unfamiliar with the machine's operating methods are prohibited from operating. 2. The operator of the tillage machine should pay special attention to the safety warning signs on the machine, carefully read the contents of the signs, and express other operators. 3, the operator of the tillage machine should pay attention to prevent damage caused by the moving parts. Check that all exposed rotating parts are well protected. 4. The operator of the tiller is strictly forbidden to work fatigue so as to avoid accidents. 5. Before each work, you must check whether the engine and transmission oil are sufficient. 6. Before use, check whether the components, gear box and engine bolts are loose or fall off. 7. Check whether each operating part (bit) is flexible and effective. 8. When installing the cultivating knife, it must be confirmed that the symmetry is right and left, and the working blade faces forward, otherwise it cannot be used normally. 9. Before starting the engine, check whether the clutch is in the disengaged position and whether the shift lever is in the neutral position. 10. In order to ensure the normal operation of the engine and extend its service life, the engine must be operated with no load after it is started. The hot car can work after 5 to 10 minutes. It is better not to work at high speed and heavy load within 1 to 2 hours before starting work. If there is a racing phenomenon when the engine starts, you should quickly cut off the fuel supply or block the intake passage so that the engine can immediately stop. 11. The height of the resistance bar should be adjusted at any time according to the working conditions to maintain the horizontal position of the fuselage, so as to prevent the engine from being excessively inclined, resulting in damage to the engine due to poor lubrication. 12. It is forbidden to touch all kinds of rotary cutters during the operation to avoid injury, and keep away from the high temperature area of ​​the exhaust pipe and be careful of scalding. 13, in the replacement of tools, removal of weeds and inspection and maintenance, must be carried out after the engine stops running. 14. It is forbidden to increase the speed of the machine in any way. 15, the engine speed, power and other parts have been adjusted on the test bench is normal, is strictly prohibited. 16. The machine has no lighting device and operation at night is strictly prohibited. 17. The tiller operates at a low speed in the vicinity of fields such as farmland, ditch, cave, and canal. 18. When the oil is added, stop and avoid the fire. 19. Work on the slope area should pay attention to the machine balance and work along the slope direction. The slope should be less than 25 degrees. 20, when the machine is running, it is strictly prohibited to approach or touch the rotating parts to avoid accidents. 21, no tillage machine hanging bucket.

1.Store in dry and cool condition, keep away from material with odor or of volatilization, protect from water and wet.

2.Best within 24 months from manufacturing date.

Isomalto-oligosaccharide 500(Cassava)liquid

imo isomalto-oligosaccharides fiber syrup

Shandong Bailong Chuangyuan Bio-tec Co.,Ltd , https://www.Chinabailong.com