Human Angiopoietin Related Growth Factor (AGF) ELISA Kit Instructions for Use
Human Angiopoietin Related Growth Factor(AGF) ELISAKit
 (used in serum, plasma, cell culture supernatants and other biological fluids)
principle
This experiment used double antibody sandwich ABC-ELISA. The anti-human AGF monoclonal antibody is coated on the microplate, the standard and the AGF in the sample are combined with the monoclonal antibody, biotinylated anti-human AGF is added, and the immune complex is formed on the plate, horseradish peroxidase The labeled Streptavidin is combined with biotin, and the substrate working solution is blue. Finally, the stop solution sulfuric acid is added, and the OD value is measured at 450 nm. The AGF concentration is directly proportional to the OD value, and the AGF concentration in the sample can be obtained by drawing a standard curve.
Kit composition(2-8 ° Cpreservation)
Coated Wells
96 holes
Enzyme Conjugate
12ml
10× specimen dilution (Sample Buffer)
12ml
20×Wash Buffer
50ml
Standards: 0.4ng / bottle
2 bottles
Substrate working fluid (TMB Solution)
12ml
Primary antibody working solution (Biotinylated Antibody)
12ml
Stop Solution
12ml
Prepare reagents and collect blood samples
1. Collection of specimens: serum, plasma (EDTA, citrate, heparin anticoagulation), cell culture supernatant, tissue homogenate, etc., as early as possible, stored at 2-8 ° C for 48 hours; longer time must be frozen (-20 °C or -70 °C) Save to avoid repeated freezing and thawing. With sample dilution is normal sample measured before 1:50 dilution (take 20ul, sample plus diluent 980ul, diluted 50-fold).
2. Standard solution preparation: Add 0.2ml of distilled water before use and mix well to form a 2000pg/ml solution. Set 8 tubes of standard tube, and add 200 ul of standard dilution solution to each tube. Add 200 ul of 2000 pg/ml standard solution to the first tube, mix and aspirate 200 ul with a pipette, and transfer to the second tube. Repeat the dilution as described above, and aspirate 200 ul from the seventh tube and discard it. The eighth tube is a blank control.
3. The 10× specimen dilution was diluted 1:10 with distilled water (example: 1 ml concentrated dilution + 9 ml distilled water).
4. Washing solution: diluted 1:20 with distilled water (example: 1 ml concentrated washing solution added to 19 ml of distilled water)
Test procedure
1. Loading: Add 100 ul of standard or sample to be tested in each well. Mix the reaction plate thoroughly and let it stand at 37 °C for 120 minutes.
2. Wash the plate: Wash the plate thoroughly with washing solution 4-6 times, and dry it on the filter paper.
3. Add 100 ul of the first antibody working solution to each well. The reaction plate was thoroughly mixed and placed at 37 ° C for 60 minutes.
4. Wash the board: the same as before.
5. Add 100 ul of enzyme-labeled antibody working solution per well. The reaction plate was placed at 37 ° C for 30 minutes.
6. Wash the board: same as before.
7. Add 100 ul of substrate working solution per well, set 37 The reaction was carried out in the dark at °C for 15 minutes.
8. Add 100 ul of stop solution to each well and mix.
9. Measure the absorbance at 450 nm using a microplate reader within 30 minutes.
Result calculation and judgment
1. All OD values ​​should be subtracted from the blank value before calculation.
2. Using standard products 1000, 500, 250, 125, 62.5, 31.2, 15.6, 0 pg/ml as the abscissa and OD as the ordinate, plot on the coordinate paper and draw the standard curve.
3. According to the sample OD value, find the corresponding AGF content on the graph, and then multiply the dilution factor 50.
Kit performance
1. Sensitivity: The minimum AGF detection concentration is less than 10pg/ml.
2. Specificity: Recombinant or natural human AGF can be detected simultaneously. Does not cross-react with other human cytokines.
3. Repeatability: The coefficient of variation in both the plate and the plate is less than 10%.
Precautions
1. It is recommended to make double holes for the above standard holes and samples to be tested. The standard curve should be made at the same time for each measurement.
2. The washing process is critical. Insufficient washing will result in an accuracy error and an erroneous rise in the OD value.
3. After the slats are opened, the remaining slats should be sealed again to keep the slats dry .
4. This kit should be stored in a 4 o C refrigerator.
5. This kit is for scientific research only and cannot be used for clinical diagnosis!
Why does the Goji Juice Benefits on the market have such a high sales volume?
Many people think that wolfberry is a vegetable, but it has the effect of Chinese herbal medicine. The ancients like to add wolfberry to it when making medicinal meals. The wolfberry liquid is another fresh way of eating medlar. I believe everyone is familiar with Ningxia Goji Juice benefits. Now I will briefly explain why the goji juice benefits on the market has such a high sales volume:
1. Goji berries are naturally picked, fresh and pressed, with high nutrition
Nowadays, more and more people give up carbonated beverages with excessive dietary additives, and choose to drink the raw liquid of medlar which is naturally picked and pressed. This wolfberry is harvested from plateau areas with good water quality. It is done in one go from picking in the field to crushing and juicing in the workshop, and the original nutrients are still kept from being destroyed and discarded during the production and production process.
2. Bus sterilization to ensure safe drinking
The sales volume of goji juice benefits on the market has shown a rapid development trend. Especially women who love beauty and beauty, they think it is an important help to help beauty and fitness. It is well known that carbonated drinks are the natural enemy of women gaining weight, and most of the Goji Berry Juice is made by the bus sterilization method. The original drinking feature can ensure that women are safe and not easy to gain weight when eating.
3. Preserve the biological activity of wolfberry intact
The reason why goji juice benefits can frequently innovate in sales is because it can completely preserve the biological activity of wolfberry. For example, some people are often troubled by high-intensity work and insomnia, and the biologically active ingredients in goji juice benefits can help activate the vitality of human cells and provide sufficient nutrients for cell division and growth.
The widespread application of goji juice benefits has promoted the development of the wolfberry production industry, and news about the production of goji juice benefits has frequently attracted great attention. The reason why goji juice benefits sold on the market has such a high sales volume is not only because goji berries are naturally picked and freshly pressed and have high nutrition, but also because it is made by bus sterilization to ensure safe drinking, and it can also preserve goji berries intact. The biological activity.
